How to Add Reverb in FL Studio: Guide for Home Recording Studio

Do you want to make your music creation professional right at your home recording studio? This article can help by showing you how to add Reverb in FL Studio!

by Derrick Reeves | Updated: June 24, 2021

*Products recommended in the post contain affiliate links. If you buy something through our posts, we may receive a commission at no extra charge to you.

Have you ever wondered why your recordings or songs don’t sound as good as you want, no matter how hard you try to add different effects or edit them? Or, do you feel like your songs don’t sound deep or appealing but sound pretty easy-to-make?

There might be different reasons for that, but if you haven't tried to add reverbs in your creations, this article will have something you need. Hence, keep reading this post as I will show you how to add Reverb in FL Studio with a few simple steps.

Here is how you’re going to add Reverb:

  • Step 1: Look for the Mixer Channel, then open it.
  • Step 2: Choose the track that you want to add Reverb to
  • Step 3: Find the slot that you want to add, then click on it.
  • Step 4: Under the "Delays and Reverbs" section, click "Fruity Reeverb 2".

That's it! If you want to learn more about reverbs and how it works on FL Studio, keep reading!

Reasons for Adding Reverb To Your Music Creations

Reverb is not something new for professional and amateur music mixers. If you’re struggling with making your songs and mixes sound more appealing after adding different effects and elements, Reverb might be the best solution for you.

First off, Reverb can make your songs sound so much deeper. It will make your audience feel like your creations were professionally and carefully made, not just some random recording.

Moreover, you can also blend many different types of sounds into your songs to make them sound better.

Another reason for adding Reverb is that it will allow you to create different types of "space" effects to your songs. The easiest example is that whenever we sing or make sounds in our bathroom, the sounds are always different from what they’re outside.

By adding Reverb, you can easily give your songs more reflections and acoustic spaces without the need to record in different spaces or studios.

Even though there are many different sound-mixing software and tools out there, FL Studio is still the best software to add Reverb to your song. It would be super easy for you to add the reverbs you like and use its Fruity Reverb.

In the next section, we will tell you exactly how to add Reverb in FL Studio.

How To Add Reverb In FL Studio - The Right Way

Step-by-Step Guide

Before adding reverbs, remember that you should not overdo it, as reverbs are not the only solution for all issues you got with your song. Therefore, it's better to add reverbs and carefully check if it’s suitable for your songs or not. Here are four simple steps that you can do to add reverbs in your songs:

  • Step 1: Look for the Mixer Channel, then open it.

Look for the Mixer Channel, then open it.

  • Step 2: Choose the track that you want to add Reverb to

Choose the track that you want to add Reverb to

  • Step 3: Find the slot that you want to add, then click on it.

Find the slot that you want to add, then click on it.

  • Step 4: Under the "Delays and Reverbs" section, click "Fruity Reeverb 2".

Under the Delays and Reverbs section click Fruity Reeverb 2

Add Fruity Reeverb 2 In The Right Way

After clicking Fruity Reeverb 2, there are many options for you to choose from. To use these tools correctly, be mindful first about what these options are and then decide what Reverb you want to add.

Add Fruity Reeverb 2 In The Right Way

L.cut - H.cut

These two are easy to understand: L.cut (means low cut) can cut the lower frequencies of your reverbs, and H.cut (means high cut) will help you cut the higher frequencies off the Reverb.

Bass - Dec - Damp - Cross Section

  • Bass

If you want to change your song's mood, click the Bass option as it represents your bass frequencies' decay time.

  • Dec (means decay)

This section will represent the Reverb's overall decay time.

  • Damp 

Damp (or high damping) is for damping the high frequencies.

  • Cross (or Bass crossover)

Cross will signify the point that is below bass frequencies.

Dry - ER - Wet Sliders

You will easily see three sliders after open Fruity Reeverb 2, and here are their definition :

  • Dry (Dry levels)

This feature will show the rawness in the sound of your songs.

  • ER (Early Reflection): 

This snob shows the first signs of our reverbs.

  • Wet (Wet levels)

The wet level can signify the amount of Reverb you use on your track.

Delay - Size - Mod - Speed.

  • Delay 

You can control the delay between the first reverberated signal and the input with "Delay."

  • Size 

This option will allow you to increase the room size and show the size of your virtual room.

  • Diff (means Diffusion)

Diff will let you know the reflection of the sound that bounces back from the virtual room.

  • Speed   

This is the speed of the Reverb's modulated sine wave.

  • Mod (Modulation)

This option will modulate the Reverb time.

Tips When Adding Reverb

Although Reverbs can make your songs sound a lot better, too much of anything is bad, and adding Reverb to your music creation is not an exception.

If you add a relevant amount, the song will sound better. Meanwhile, your song might sound “tuneless" if you add it too much.

One of our recommendations for you is to ask your friends, other fellow music creators, or anyone with good taste in music if your song sounds "right" or not. Your experienced friend can help you with your problem.

Conclusion

Carefully-made and professional songs always give us an appealing feeling, as people sometimes call it the "expensive" feeling of the song. After guiding you on “How to add Reverb in FL Studio” to your songs or other music creations, you’ve understood that using reverbs can be a great way to create a deep and professional-feeling do it properly.

However, it would be best if you were mindful of whether the way you add reverbs is correct or not. Make sure the Reverb is your helper, not a song destroyer!

crossmenu